Asepti Wash

Manual Cleaning and Soaking:

• Pre-wash all grossly soiled items with cold-ambient running water.
• Fill sinks with warm water.
• Asepti Wash is dosed at 2 – 5 mL per Litre.
• For routine soils dose at 2 – 3 mL per Llitre.
• For heavy soils such as orthopaedic sets, 4 – 5 mL per Litre.
• If pumping manually, swirl to mix. Automatic dispensers are available.
• Determine solution replacement cycle and monitor.

Ultrasonic Cleaning:

• Dose Asepti Wash at 0.5 mL – 2 mL per Litre.
• Dispensing via an automatic wall mounted unit is recommended.
• Determine solution replacement cycle and monitor.

Endoscope Pre-Cleaning and Cleaning:

• Prepare a fresh solution for each scope by diluting Asepti Wash at 5 – 10 mL per Litre at 30-50°C.
• Soak disposable cloth in bath and wipe away visible soil from the insertion tube endoscope exterior.
• Place biopsy tip into solution and aspirate detergent through suction/biopsy channel.
• Remove tip from bath and alternate the suctioning of air and detergent until expelled solution is visibly clean.
• Completely immerse the endoscope in the bath. Whilst immersed brush all channels and exterior surfaces and then flush and fill all channels with Asepti Wash solution.
• Asepti Wash is supplied with two manual pumps delivering approximately 25 mL per push.
• Automatic Dispensers which control product use and concentration are available. Please contact Ecolab Healthcare for further information.
• Rinse scope, channels, removable parts with water to remove all detergent residues prior to disinfection.
• Discard all used solutions and materials.

• UW565 Ultrasonic Cleaner
• Bandelin Sonorex
• Bandelin Sonomic
• Bandelin Trison
• Bandelin Sonoboard